Pick one of the ten voice profiles above. Each loads its own designation card, default pitch/rate, and a matching system voice where available.
Type or paste your line into the Message Buffer, then press PLAY. A short intro stinger plays, then the line is spoken while the drone bed, word blips, and line static respond live underneath it. The same button becomes STOP while a line is playing — press it again to cut the transmission short.
System Voice and Pitch sit on their own row. System Voice overrides the preset's default voice if you want a different one installed on your machine. The fader bank below covers Rate, Bed/Drone, Word Blips, Blip Density (how many words actually trigger a blip), Line Static, Drive (distortion on the drone bed), Room Size (echo spaciousness), and Echo Tail (how much echo is mixed in) — all adjustable per take before pressing PLAY.
Jumps every fader in the Signal Parameters bank to a new random value in one click — useful for auditioning a preset's range quickly. It never touches System Voice or Pitch, so the cast voice itself stays put.
This app can't capture its own audio — browsers don't allow a page to record the built-in text-to-speech voice directly. To capture a take, use a separate recording tool running on your machine:
Start the recorder, press PLAY, then stop the recorder once the line finishes — this captures the full mix, spoken voice included.